The advantages and disadvantages of
- Protection integrity. After the solution dries, a thin film forms. It does not allow air or moisture to pass through. This film prevents oxygen from reaching the infected microflora. As a result, the life activities of microorganisms are inhibited.
- Safety. Germicidal varnishes are characterized by minimal adverse reactions.
- lasting. These medications are used several times a week. If you skip this procedure, its effectiveness will not be greatly affected.
- Versatility. They are effective in treating and preventing onychomycosis. Dermatologists can prescribe treatments for people at high risk. These are increased sweating, foot lesions, concrete work.
General application rules
important! The nail plate surface must be degreased. To do this, combine this product with an antifungal nail polish.
- Dry your feet thoroughly and wipe your nail plates. Then polish them with a nail file. It is important that the nails are not too long. It needs to be pruned as carefully as possible;
- Apply a thin layer of product. The required frequency of use is indicated in the instructions for use;
- Wait for the composition to dry;
- Disinfect all pedicure accessories. This goes for nail files and scissors. In this case, recurrence of the disease and secondary fungal infections can be avoided.
Contraindications
List of the most effective drugs
Varnish containing the active ingredient amorolfine hydrochloride (5%)
- Apply varnish to the affected board once or twice a week;
- Start by removing your nails and filing them to a minimum length. The boards also need to be degreased in advance;
- Apply varnish gently. The skin was not touched. After handling the affected panels, the product should dry. This will take three to five minutes;
- Treatment should be continued until the nail is completely healed.
Varnish containing the active ingredient amorolfine (5%)
notes! An absolute contraindication is allergy to the ingredients of the product. The relative limitations are pregnancy and breastfeeding.
Varnish containing the active ingredient terbinafine (1%)
- Feet are pre-steamed and cleaned;
- Apply the varnish in a thin, flat layer - it should completely cover the affected area;
- The treated area should not be washed for 24 hours.
Varnishes and creams containing the active ingredient amorolfine (5%)
- The surface of the board has been cleaned and degreased. Use a cotton swab dipped in alcohol;
- Before each application of the drug, the nail in question is treated. Use a nail file and a cotton swab to remove the remaining varnish layer;
- Place the applicator into a bottle of varnish. Next, carefully pull it out. The excess will not erase the bottleneck;
- Use an applicator to spread the varnish evenly. Affects the entire surface of the affected board. This is how every nail is treated. The varnish dries within three minutes.
Varnish containing the active ingredient naftifine (1%)
- Wash and dry feet;
- Trim your nails as much as possible, loosening their structure slightly with a nail file;
- The varnish is applied evenly - touching adjacent areas of the skin.
Varnish containing the active ingredient amorolfine hydrochloride (5%)
Please note! Most effective in treating yeast and dermatophytes.
- Carefully apply varnish to previously cleaned dish;
- First make sure there is no damage or cracks;
- You can use two coats of product - the first layer applied after the second layer dries.
Cheap but effective antifungal varnish
Varnish containing the active ingredient cycloperoxide (8%)
- Apply varnish thinly to the nail in question. Do this every other day for the first month;
- Second month - twice a week, third month - once every 7 days;
- During the week, such as Saturday, the varnish is removed. A special solvent is used for this;
- Treatment continues until complete recovery.
Varnish with active ingredient formaldehyde 5%
- The nails are processed well and the boards are cut as short as possible;
- Use a nail file to remove the top layer;
- Dry your nails and apply a thin, even layer of varnish;
- The composition must be dry.
oil based varnish
- Treat the plates, cuticles, and phalanges with chlorhexidine. If not available, use other preservatives;
- The varnish is divided into two layers;
- Allow partial contact with the cuticle area.
Varnish containing the active ingredients clotrimazole (1%) and ciclopirox (8%)
- Used it every day for the first month. Apply product carefully without damaging skin;
- Once a week, remove hardened varnish with a special liquid;
- Second month of treatment. Use this product twice a week. Once every 7 days, the coating is completely removed. Nails filed and trimmed;
- The third month of treatment. Applying once a week is enough.